User's Manual

Get Information
Page 106 FlexWave Prism Element Management System 7.1 User Manual
©
2011 ADC Telecommunications, Inc ADCP-77-177 • Issue 1 • July 2011
Viewing the Delay Report
To access the Linked DARTs Delay report, in the System Menu bar, click System
Information > Get Information, and then in the Reports panel Type list, select Delay.
The Linked DARTs Delay table provides the following information:
• Host columns—identifies the Host in the link
– DART Id—number of the Host slot in which the DART is installed
– DART Name—user-defined name for the Host DART.
• Remote columns—identifies the Remote and its elements
– Id—Unit ID of PRU/URU based upon layered address; see “Unit
Identification” on page 43
– Name—user-defined label for the PRU/URU
– DART Id—PRU/URU slot number in which the DART is installed
– DART Name—user-defined name for the Remote DART
– Forward Delay (s)—user requested FWD RF path delay in microseconds
– Reverse Delay (s)—user requested REV RF path delay in microseconds.
• Common columns—identify configuration settings that are common to the Host
and connected Remote(s)
– Passband—type of passband provided by the DART
– Frequency (MHz)—passband frequency of the DART.