User's Manual

Get Information
Page 104 FlexWave Prism Element Management System 7.1 User Manual
©
2011 ADC Telecommunications, Inc ADCP-77-177 • Issue 1 • July 2011
Viewing the Network Report
To access the Network report, in the System Menu bar, click System Information > Get
Information, and then in the Reports panel Type list, select Network.
The Network Statistics table provides the following information:
• Unit Id—identifies the unit within the system; see “Unit Identification” on
page 43.
• Port—identifies the port
– Host ports can be any of the following:
 Network Port
 Craft Port
 Switch Port
– Remote Unit port is indicated only as a Switch Port
NOTE: A Switch Port is the CPU’s connection to the Ethernet switch that in turn communicates to
the fibers. This shows how much traffic the unit is generating and consuming.
• Rx Bytes—count of Receive Bytes.
• Rx Packets—count of Receive Packets.
• RX FCS Errors—count of Receive FCS Errors.
• Tx Bytes—count of Transmit Bytes.
• Tx Packets—count of Transmit Packets.