User's Manual

System Information
FlexWave Prism Element Management System 7.1 User Manual Page 103
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
The Hardware Inventory page has separate tables for each Host and Remote Unit in
the system. For each Remote Unit listed, there is also a corresponding LPA table.
Each unit is identified by name and IP address in a title bar at the top of the table.
Each table provides the following information:
• Module Type—identifies the module by type, such as System Card, DART, SeRF
(not used in the LPA table).
• Module Number (LPA table only)—identifies the LPA.
• Id—applicable to the DARTs and LPAs only; for further information see “RF
Module Capabilities and GUI Representation” on page 21.
• Date Code—date code for the module.
• Hardware Version—release version number for the module.
• Serial Number—serial number for the module assigned during manufacturing.
• Part Number—Part Number for the module assigned during manufacturing (not
applicable to the LPA).
• Description (LPA only)—band type of LPA/LPA power in Watts.