User's Manual

System Information
FlexWave Prism Element Management System 7.1 User Manual Page 101
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
Accessing System Reports
You use the Type list in the Reports panel to select the type of report that you want
to download. The following sections describe the reports that you can view and
download.
Viewing the Software/Firmware Report
To access the Software/Firmware report, in the System Menu bar, click System
Information > Get Information, and then in the Reports panel Type list, select
Software/Firmware. (This is the default setting.)
The Software/Firmware table provides the following information:
• Module Type—type of unit (Host, PRU, or URU).
• Name—user-assigned name for the unit.
• Unit Id—identifies the unit within the system; see “Unit Identification” on
page 43.
• Version—version of installed software/firmware.
• Upgrade Status—the following states can be seen. However, with the exception of
Normal operation and Upgraded, the states occur very quickly during the
corresponding action and are rarely viewed.
– Normal operation
– Upgrading
– Upgrading reboot
– Committing
– Aborting
– Recovering
– Upgraded.