User's Manual

Initial FlexWave Prism System Setup
FlexWave Prism Element Management System 7.1 User Manual Page 93
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
3 Click Apply.
• Once the system executes the command, an Operation completed message
displays.
• The Remote Forward Gain table at the bottom of the page is updated with
the new settings.
4 Repeat for each PRU/URU DART.
For additional information, refer to the following:
• For information on the Remote Forward Gain Settings table, see “Viewing the
Remote RF Report” on page 109.
• For information on the LPA Reset button, see “Resetting an LPA” on page 165.