User's Manual

Initial FlexWave Prism System Setup
FlexWave Prism Element Management System 7.1 User Manual Page 89
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
5 In the Gain Mode list, select one of the following:
• Normal—no increase to the gain setting.
• High—the gain settings for Classic DARTs increase 2dB with a 1dB
improvement in the Noise Figure and the gain setting for SuperDarts
increase by 6 dB with a 2dB improvement in the Noise Floor.
6 Click Apply. The Host Parameters and Host Reverse Gain Settings tables are updated
with the new configuration.
7 Repeat Step 2 through Step 6 for each Host DART.