User's Manual

Set the Forward and Reverse Delays
Page 84 FlexWave Prism Element Management System 7.1 User Manual
©
2011 ADC Telecommunications, Inc ADCP-77-177 • Issue 1 • July 2011
Filtering the Linked DARTs Delay Table
1 In the Filter panel View list, select a filter to be applied to the table.
2 In the contains box, enter filter criteria.
3 Click Filter to apply the filter.
In the following example, the Linked DARTs Delay table has been filtered to show
only those Host Units with a DART Id that contains “2”.