User's Manual

Initial FlexWave Prism System Setup
FlexWave Prism Element Management System 7.1 User Manual Page 81
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
DART Start and Stop Frequencies
Host SuperDARTs support the selection of a Start and Stop frequency for the
passband or for the selection of subbands (up to two start-stop frequency pairs
may be selected as long as the two pairs are at least 5 MHz apart and one is limited
to 39 MHz and the other is limited to 25 MHz).
NOTE: Start/Stop frequencies and subbands may not be used at the same time.
Table 22 lists the supported start-stop frequency ranges for SuperDARTs.
Table 22. Supported SuperDART Stop/Start Frequency Ranges
Frequency
Range
(MHz)
Timeslots
6 1
12 2
18 3
25 4
39 6
45 8
75 12