User's Manual

Initial FlexWave Prism System Setup

FlexWave Prism Element Management System 7.1 User Manual Page 79

SuperDART Models

The following sections describe the Prism SuperDART options.

700 Lower ABC SuperDART

The 700 Lower ABC SuperDART supports the following subbands: A, B, C.

Table 20 lists the passband selections for 700 Lower ABC SuperDARTs.

700 UpperC SuperDART

The 700 UpperC SuperDART supports the following passband: Upper C.

Table 21 lists the passband selections for 700 ABC SuperDARTs.

2100 AWS SuperDART

You can select any number of the subbands based on the limitations specified

below.

• The 2100 AWS SuperDART supports the following passbands: A, B, C, D, E, F.

• You can select up to two non-contiguous sets of subbands, but there must be

at least a 5 MHz gap between the bands.

• The Start and Stop frequencies are in the range of 2110MHz - 2155MHz.

EGSM 900 SuperDART

The EGSM 900 SuperDART supports the selection of a Start and Stop frequency

for the passband in the range of 925MHz - 960MHz.

Table 20. 700 Lower ABC SuperDART Passband Selection

Name Downlink Frequency

Range (MHz)

Uplink Frequency

Range (MHz)

A 728 - 734 698 - 704

B 734 - 740 704 - 710

C 740 - 746 710 - 716

Table 21. 700 UpperC SuperDART Passband Selection

Name Downlink Frequency

Range (MHz)

Uplink Frequency

Range (MHz)

UpperC 746 - 756 776 - 786