User's Manual

Configure DART Links
Page 74 FlexWave Prism Element Management System 7.1 User Manual
©
2011 ADC Telecommunications, Inc ADCP-77-177 • Issue 1 • July 2011
3 In the Remote Parameters table, set the following parameters:
a In the Remote Id list, select the Remote Unit whose DART you are linking to
the Host DART.
b In the DART list, select the Remote Unit DART that you are linking.
c In the DART Name box, enter a name for the DART, which must start with an
alphabetical character, contain between 5 and 32 characters (alphanumeric
or underscore only), and contain no spaces.
d Select the Linked box.
4 Click Apply. The Linked DARTS table at the bottom of the page updates with the
new link.
5 Repeat Step through Step 4 for each Host and PRU/URU DART pairing.
NOTE: Each link takes approximately 1 minute to establish.