User's Manual

Using the Prism EMS
FlexWave Prism Element Management System 7.1 User Manual Page 47
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
FOLLOWING THE PROCEDURES IN THIS DOCUMENT
This section tells you how to use this document to use the FlexWave Prism EMS to
configure and manage Prism devices.
Starting a Procedure
All procedures in this document assume that you have already logged in to the
EMS as described in
“Access the EMS” on page 57.
Modifying Parameters
In general, the procedures in this document end by having you click OK or Apply to
accept changes or input.
When an operation completes, an Operation completed message displays, such as the
one shown in
Figure 21. If an error message displays, follow the screen prompts.
You can click Refresh to update the data being shown.
Figure 21. Operation Completed Message