User's Manual

Label PRU/URU Optical Ports
Page 70 FlexWave Prism Element Management System 7.1 User Manual
©
2011 ADC Telecommunications, Inc ADCP-77-177 • Issue 1 • July 2011
LABEL PRU/URU OPTICAL PORTS
1 In the System Tree, click on a PRU/URU icon.
2 In the Unit Menu bar, click Unit Configuration > Configure Optical Ports, to open the
Unit Configuration > Configure Optical Ports page.
3 In the SFP Name box, enter a label for the selected Optics port. The SFP Name
must start with an alphabetical character, contain between 5 and 32 characters
(alphanumeric or underscore only), and contain no spaces. The default SFP
Name is UNKNOWN_SFPNAME.
4 Click Apply. Once the system executes the command, an Operation completed
message displays.
5 Repeat this process for each PRU/URU in the system.
The Configure Optical Ports table provides the same information as what is shown for
a Host Unit—see
“Label the Host Optical Ports” on page 67.