User's Manual

Label the PRU/URU
Page 66 FlexWave Prism Element Management System 7.1 User Manual
©
2011 ADC Telecommunications, Inc ADCP-77-177 • Issue 1 • July 2011
LABEL THE PRU/URU
1 In the System Tree, click the icon of the PRU/URU whose properties you want
to change.
2 In the Unit Menu bar, click Unit Configuration > Edit Properties, to open the Unit
Configuration > Edit Properties page for the selected PRU/URU.
3 In the Name box, enter an identifying name for the PRU/URU. The Name must
start with an alphabetical character, contain between 5 and 40 characters
(alphanumeric or underscore only), and contain no spaces.
4 Leave the Capacity setting as is.
CAUTION! The Capacity setting pertains to the PRU/URU Remote SeRF Interface (RSI) board and the
number of RF groups available to the Remote Unit. This parameter is set during
manufacturing and should be changed only when the RSI board has been replaced. See
“Set the Capacity for a New Remote Unit RSI Board” on page 162.
5 (Optional) Use the Notes box to enter notes specific to the selected PRU/URU.
You can enter up to 256 characters; all keyboard characters can be used.
6 Click Apply. Once the system executes the command, an Operation completed
message displays.
7 Repeat this process for each PRU/URU in the system.