User's Manual

Initial FlexWave Prism System Setup
FlexWave Prism Element Management System 7.1 User Manual Page 57
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
ACCESS THE EMS
NOTE: In the default configuration, the Craft port has a DHCP server that assigns an IP address
to the computer that is connected. You should therefore have your network interface
configured for DHCP, or configured with a static IP address in the same subnet, where the
default is 192.168.0.1/24.
1 To allow the EMS popup and alarm
screens to function correctly, do one
of the following:
• Disable the popup blocker for
your web browser.
• Enter the system IP address in
the web browser’s trusted sites
list.
2 Use an Ethernet CAT 5 cable
(straight or crossover) with RJ-45
connectors to connect a laptop to
the Craft port of the Host.
3 Connect your computer and start a
web browser.
4 In the web browser URL box, enter
the following IP address:
192.168.0.1
77073-075
RJ-45
Connector
Detail