User's Manual

Prism System Overview
FlexWave Prism Element Management System 7.1 User Manual Page 33
ADCP-77-177 • Issue 1 • July 2011 © 2011 ADC Telecommunications, Inc.
PRISM SYSTEM SPECIFICATIONS
Table 7. RF and Optical Specifications
Parameter Specification
a
Remarks
RF Specifications
Supported Frequency Blocks 1-8 per Host Unit
Bandwidth 1.5 to 75 MHz non-contiguous
Supported Frequency Bands • 850 Cellular
• 1900 PCS
• 700 LowerABC
• 700 UpperC
• 2100 AWS
• 800/900 E-SMR
• 900 GSM
• 1800 DCS
• 2100 UMTS
Propagation Delay
System Delay <12 microseconds
Delay Management Digital Manual or Automatic
Reverse Path Noise Figure Noise Figure Input
Typical Maximum IP3
Normal Mode 5 dB 6 dB >-8 dBm
High Gain Mode - Classic DARTs 4 dB 5 dB >-12 dBm
High Gain Mode - SuperDARTs 3 dB 4 dB >-14 dBm
System Gain Standard High Gain
Mode Mode
Classic DARTs 36 dB 38 dB
SuperDARTs 30 dB 36 dB
Optical Budget for optical BER of 10
–6
Standard Optional
26 dB 13 dB
Digital Transport Rate 3.072 Gbps
Optical power levels Minimum Maximum
Intermediate Range Launch Power -5 dBm 1 dBm
Intermediate Range Receive Power -18 dBm 1 dBm
Long Range Launch Power -2 dBm 3 dBm
Long Range Receive Power -27 dBm -9 dBm
Transceiver Wavelengths For information on transceiver
transmissions with a CWDM, see the
ADC FlexWave Prism Coarse
Wavelength Division Multiplexer User
Manual (ADCP-75-353).
Transmits 1550 nm signal
Receives 1550 or 1310 nm signal