User's Manual

DART Modules
Page 28 FlexWave Prism Element Management System 7.1 User Manual
©
2011 ADC Telecommunications, Inc ADCP-77-177 • Issue 1 • July 2011
Host DART Connectors and LEDs
Only RF DART Modules can be installed in the Host Unit.
DART Type Ref # Component Device Function
Host RF 2 FWD RF IN QMA-Type female RF
coaxial connector
Input connection point for the forward path RF coaxial
cable to the BTS
4 REV RF OUT QMA-Type female RF
coaxial connector
Output connection point for the reverse path RF
coaxial cable to the BTS
Ref # LED LED Color Description
1 PWR • Green • Card is powered.
• Red • Problem with onboard power
• Off • No power present at card.
3 STATUS •Green •OK
•Red •Major Alarm
• Yellow • Automatic Level Control active
1
4 3 2
Host RF DART
REV
RF OUT
FWD
RF IN
PWR
STATUS
S-DART
FWD 925-960
REV 880-915
FWD NOT TO
EXCEED +5 dBm