User's Manual

Prism Remote Units
Page 22 FlexWave Prism Element Management System 7.1 User Manual
©
2011 ADC Telecommunications, Inc ADCP-77-177 • Issue 1 • July 2011
Table 1 and Figure 10 on page 23 describe how the EMS references the RF group
assignments and corresponding components of each RF Module.
NOTE: In a dual-LPA system, the Configure Remote Forward Gain page shows two values for the
LPA status, one for each LPA. Changing the LPA Mode or resetting the LPA applies to both
LPAs at the same time. For further information on setting the LPA Mode, see “Configure
Remote Forward Gain” on page 91. For further information on resetting an LPA, see
“Resetting an LPA” on page 165.
Table 1. Remote RF Group Assignments (from Top/Down)
Physical
RF Slot
RF
Group
DART
Number
LNA Number
LPA
Number
Power
Detector
Number
Primary Diversity
D D 8 8 4 4
7 7
C C 6 6 3 3
5 5
B B 4 4 2 2
3 3
A A 2 2 1 1
1 1
SeRF Board