User's Manual

ADCP-75-347 • Issue 1 • 04/2008
Page 18
© 2008, ADC Telecommunications, Inc.
Figure 13. Solar Shield Installation
4.8 Touch-Up Painting
A brush-in-cap type bottle of paint is available for touching-up nicks and scratches in the
factory coat of paint. Lightly sand the area to be painted and then clean it thoroughly to remove
and dirt, dust, or foreign matter. Shake the paint bottle until thoroughly mixed and then apply a
light coat of paint to the damaged area using the small brush attached to the cap. Wait until the
paint is dry and apply a second coat if necessary. When finished painting, replace the paint
bottle cap and tighten securely.
3/8-INCH HEX
STANDOFF (3)
#10 SPLIT
WASHER (3)
3/8-INCH 10-32 SCREW
WITH PHILLIPS DRIVE (3)
22448-A