User's Manual

Managing Remote Units
Page 244 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
10.6 DECOMMISSIONING A REMOTE UNIT
The
Decommission
button is available only when a Remote has already been physically
removed from the system. You use the
Decommission
button to delete alarms related
to the removed Remote from the EMS alarm summaries.
11 If the system is configured for manual linking mode, remove any RF links to the
DART.
22 In the Function Explorer Tree, select the node that corresponds to the Remote that
has been physically removed from the Prism system.
This opens the
Prism Remote Unit Remote
-n summary that corresponds to the
selected Remote (
Remote
-n). There should be a statement that communication
with the Remote has been lost.
Only a user logged in under the admin or a Network Manager account can change Prism
system settings t
hrough the EMS.
Decommission a Remote only if it has been permanently removed from the Remote and
will not be replace
d with another Remote. This procedure removes all information about
this Remote (such as associated a
larms, links, and inventory) from the EMS database.