User Manual Part 3

FlexWave-URH Agent MIB
FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 305
ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
fwuRmtLNARIHWVer
LNA Inventory Data-Hardware
Version.
DisplayString GET
fwuRmtLNAPowerFaultMask
Shows masking status of
Remote LNA Power Fault;
masking is disabled by
default; if enabled, the trap
will not be raised
MASKType SET
fwuRmtRDINumber
A unique identifier for each
RDI (from 1 to 4)
Integer32 GET
fwuRmtRDIRIADCPartNumber
RDI Inventory Data-ADC Part
Number
DisplayString GET
fwuRmtRDIRISerialNumber
RDI Inventory Data-Serial
Number
DisplayString GET
fwuRmtRDIRIDateCode
RDI Inventory Data-Date Code DisplayString GET
fwuRmtRDIRIHWVer
RDI Inventory Data-Hardware
Version
DisplayString GET
fwuHstDARTOverDriveFaultMask
Shows masking status of
Host DART Over Drive Fault;
masking is disabled by
default; if enabled, the trap
will not be raised
MASKType SET
fwuHstDARTUnderDriveFaultMask
Shows masking status of
Host DART Under Drive Fault;
masking is disabled by
default; if enabled, the trap
will not be raised
MASKType SET
fwuRmtOverTempFaultMask
Show status of masking of
Remote over temperature
Fault; masking is disabled by
default; if enabled, the trap
will not be raised
MASKType SET
fwuRmtUnderTempFaultMask
Show status of masking of
Remote Under Temperature
Fault; masking is disabled by
default; if enabled, the trap
will not be raised
MASKType SET
fwuRmtOpenDoorFaultMask
Show status of masking of
Remote Open Door Fault;
masking is disabled by
default; if enabled, the trap
will not be raised
MASKType SET
fwuRmtFanOverSpeedFaultMask
Show status of masking of
Remote Fan Over Speed Fault;
masking is disabled by
default; if enabled, the trap
will not be raised
MASKType SET
Table 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)
Object Name Description SNMP Syntax Get
or
SET