User Manual Part 3

FlexWave-URH Agent MIB
FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 301
ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
fwuRmtSERFOptOverDriveFaultMask
Trap enable/disable for SFP
Over Drive Fault. Trap is
enabled by default. If
disabled, the trap will not be
raised.
MASKType SET
fwuRmtSERFOptUnderDriveFaultMask
Trap enable/disable for SFP
Under Drive Fault; trap is
enabled by default; if
disabled, the trap will not be
raised
MASKType SET
fwuRmtSERFEthPortNumber
A unique identifier for each
Ethernet port (from 1 to 12)
Unsigned32 GET
fwuRmtSERFEthPortType
An identifier for the type of
Ethernet port
ENETType GET
fwuRmtSERFEthPortRxBytes
Receive byte counter Counter64 GET
fwuRmtSERFEthPortRxPkts
Receive packet counter Counter64 GET
fwuRmtSERFEthPortRxFscErrors
Receive FCS error counter Counter64 GET
fwuRmtSERFEthPortRxBroadcastPkts
Receive broadcast packet
counter
Counter64 GET
fwuRmtSERFEthPortRxMulticastPkts
Receive multicast packet
counter
Counter64 GET
fwuRmtSERFEthPortRxFragmtdFrames
Receive fragments counter Counter64 GET
fwuRmtSERFEthPortRxJabbersFrames
Receive jabber counter Counter64 GET
fwuRmtSERFEthPortTxByteCounter
Transmit byte counter Counter64 GET
fwuRmtSERFEthPortTxPkts
Transmit packet counter Counter64 GET
fwuRmtSERFEthPortTxBroadcastPkts
Transmit multicast packet
counter
Counter64 GET
fwuRmtSERFEthPortTxMulticastPkts
Transmit broadcast packet
counter
Counter64 GET
fwuRmtSERFEthSFPID
Identifier of SFP to which this
Ethernet port connects to
Unsigned32 GET
fwuRmtDARTNumber
A unique identifier for each
DART Card Object of Remote
(from 1 to 8)
Integer32 GET
fwuRmtDARTName
A user defined name for each
DART Card object of Remote,
which can be up to 32
characters
DisplayString SET
fwuRmtDARTBandType
Band type of Remote DART
card
BANDType GET
Table 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)
Object Name Description SNMP Syntax Get
or
SET