User Manual Part 3

SNMP Interface
Page 294 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
fwuHstUnitReset
Host SeRF card can be reset
by setting a value of 1
INTEGER SET
fwuHstBackPlaneRev
Revision of Host back plane. DisplayString GET
fwuHstAlarmStatusSummary
Host Alarm Status Summary,
where the severity of the
alarm is:
•Normal = 1
•Minor = 2
•Major = 3
• Not Present = 0
ALARMType GET
fwuHstTempMeas
Host system temperature
value in Celsius
DisplayString GET
fwuSystemAlarmStatusSummary
System Alarm Status
Summary, where the severity
of the alarm is:
•Normal = 1
•Minor = 2
•Major = 3
• Not Present = 0
ALARMType GET
fwuHstLinkingMode
System Linking mode for
DART linking
Integer SET
fwuHstMajorContactAlarmOutput
Host Major contact output
port state
CONTACTTyp
e
GET
fwuHstMinorContactAlarmOutput
Host Minor contact output
port state
CONTACTTyp
e
GET
fwuRmtMajorContactAlarmOutput
Remote Major contact output
port state
CONTACTTyp
e
GET
fwuRmtMinorContactAlarmOutput
Remote Minor contact output
port state
CONTACTTyp
e
GET
fwuSystemAlarmSequenceNumber
Defines the index of the
Alarm Table
Unsigned32 GET
fwuSystemAlarmAgentUpTime
Agent up time TimeTicks GET
fwuSystemAlarmType
Trap OID of the Alarm OBJECT
IDENTIFIER
GET
fwuSystemAlarmHstNumber
Host number from which the
alarm has been raised
HOSTNBRType GET
fwuSystemAlarmHstName
Name of the Host from which
the alarm has been raised
DisplayString GET
fwuSystemAlarmRmtNumber
Remote number from which
the alarm has been raised
REMOTENBRT
ype
GET
Table 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)
Object Name Description SNMP Syntax Get
or
SET