User Manual Part 3

Managing Alarms
Page 258 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
11.1 VIEWING ACTIVE ALARMS
Viewing the
Active Alarm List
window is a means to determine alarm type, Host unit
name, Remote name, time stamp, and other information for active alarms.
11 To access the EMS Menu bar, in the Function Explorer Tree, click on
System View
to
display a system view.
22 To open the
Active Alarm List
window, in the EMS Menu bar select
Active Alarm List
.
The
Active Alarm List
table provides the following information:
•
Alarm Type
—Descriptive name of alarm. For more information, refer to
“Troubleshooting Alarms” on page 264.
•
Host No
—Always “
1
”
•
Host Name
—User-defined Host name or system default
•
Remote No
—System assigned number of Remote from which alarm came
•
Remote Name
—User-defined Remote name or system default
•
Module Type
—Type of unit that is experiencing the alarm (SeRF, DART, LPA, LNA,
Power Detector, SFP)
•
Module Number
—Unit number of module experiencing the alarm condition
•
Severity
—
Major
or
Minor
•
Time Stamp
—Date and time when the alarm occurred (
YYYY:MM:DD:HH:MM:SS
)