User Manual Part 3

Managing Remote Units

Page 250 FlexWave Prism Host, Remote and EMS 5.1 System Reference

10.10 VIEWING AN ALARM SUMMARY OF THE REMOTE RF

ROUPS

The

Alarm Summary of RF Groups of Remote-

n view provides an alarm summary for the

four RF groups on a particular Remote (

Remote-

n).

To open the

Alarm Summary of RF Groups of Remote-

n view in the EMS View Frame, in

the Function Explorer Tree select

System View

Remotes

Remote#-

RF Groups

(where

Remote#

indicates the Remote number that corresponds to a Host SFP port number

and

n is the Remote name).

To understand how the EMS maps the RF Groups in the Remote to their

representation in the GUI, see “RF Groups in the Remote and the EMS GUI” on

page 160. The RF Group alarm indicators are listed below.

•

DART

—Summary alarm state of the DART card upconverter, downconverter and

the DART FPGA. Yellow indicates that a Minor alarm is the highest-level alarm and

Red indicates that a Major alarm exists for the DART.

•

LPA

—Summary alarm state of Linear Power Amplifier (LPA), where both LPA

indicators refer to the same LPA. Yellow indicates that a Minor alarm is the

highest-level alarm and Red indicates that a Major alarm exists for the LPA.