User Manual Part 3

Monitoring a Remote Unit
FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 243
ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
•
Reset Unit
button—When clicked, causes the Remote to reboot. This causes a
Loss of Service until Remote has returned to normal operation. Typical down
time is two to four minutes. See “Resetting a Remote Unit” on page 246.
•
Decommission Unit
button—When clicked, deletes any configuration settings
for that Remote and removes all corresponding alarms from the EMS alarm
summaries (see “Decommissioning a Remote Unit” on page 244).
The use of the Reset Unit button causes Loss of Service and should not be used unless
other troublesh
ooting processes have been followed and did not fix the issue being
experienced at the Remote.