Manualshelf

User Manual Part 3

ManualsBrandsADC Telecommunications ManualsElectronicsFlexWave™ Prism - 40 Watt 700 Upper C - Band
101102103104105106107108109110
Page 318 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
55 Carefully withdraw the System Card from the enclosure.
66 Slide replacement System Card into the Host chassis until it is firmly seated.
77 Secure the System Card to the front of the enclosure using the two thumb screws
loosened in Step 4.
88 If used, connect EXT REF cables to the front of the System Card.
99 Plug alarm plug into the connector on the System Card.
100 Notify the NOC or alarm monitoring system operator that the system is back in
operation.