User Manual Part 2

Using the EMS to Manage a Prism System

Page 180 FlexWave Prism Host, Remote and EMS 5.1 System Reference

7.3 WORKING WITH THE SYSTEM INVENTORY

The

System Inventory

view identifies the main software and hardware components of

the current, working system.

11 To open the

System Inventory

view, in the EMS Menu bar, click

System Inventory.

22 Confirm that the Host and its Remotes are operating at the same software revision

by looking at the values displayed in the

Compact Flash SwVer

column.

33 Confirm that all installed devices are displayed in the

Hardware Inventory

table:

•• Host

–SeRFs

–DART

–System card

•• Remotes

– One RSI per connected Remote

– One SeRF per connected Remote

•• Remote RF Modules

–One RDI

– Power Detector

– One or two DARTs, depending on configuration.

– One or two LNAs, depending on configuration.

7.3.1 System Inventory View Components

The

System Inventory

view is a too long to present in one graphic. This document

therefore presents the

System Inventory

view in two sections:

• “System Inventory and Host Inventory Tables” on page 181 describes the two

tables at the top of the view.

• “Remote Inventory Tables” on page 182 describes the tables at the bottom of the

view.