User Manual Part 2

Initial Prism System Setup
Page 158 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
6.8 CONFIGURE THE REMOTE SERF OPTICAL PORTS
300 In the Function Explorer Tree, select
System View
,
Remotes
,
Remote#-
x,
SERF
,
Optical
Ports
(where
Remote#
indicates the Remote number that corresponds to a Host SFP
port number and
n is the Remote name).
The Optical Ports view for the selected Remote opens in the EMS View Frame.
311 In the
Optics Name
box, enter a label for the port that is between 5 and 32
characters with no spaces. The only special character allowed is an underscore,
but it cannot be the first character of the name. Numerals are allowed, but cannot
be the first character of the name.
322 Click
Apply
.
For information on the optical port indicators, see “Viewing Remote SeRF Optical Ports”
on page 248.
The Ip Enable field is not selectable for Remotes as it is configured at the Host SeRF
SFPs. Its incl
usion in this view is to indicate which Remote SFP has IP on it. For
information on Ip Enable alarms,
see “Viewing Host SeRF Optical Ports” on page 224.