User Manual Part 2

Initial Prism System Setup
Page 156 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
6.7 ENTER A REMOTE NAME
A Remote becomes known to the EMS when an optical fiber is connected from the
Host to the Remote and IP has been enabled as described in “Provision the Host SeRF
Optical Ports” on page 151. The Remote appears as
Remote_Unknown_RmtName
in the
the EMS Function Explorer Tree of functions and can be renamed using the following
procedure.
Remotes are assigned a number from
1
through
8
that correspond to the physical SFP
port assignment on the Host. For example, SFP port 3 is
Remote3
.
277 In the Function Explorer Tree, select
System View
,
Remotes
,
Remote#-
x (where
Remote#
indicates the Remote number that corresponds to a Host SFP port
number and
n is the Remote name).
Remote-Unknown_RmtName
is the default
Remote name until it is user-defined.
The
Remote Unit
view opens in the EMS View Frame. (For information on the alarms
shown in the
Remote Unit
view, see “Monitoring a Remote Unit” on page 240.)