User Manual Part 2

Initial Prism System Setup
Page 150 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
6.4 SET THE CLOCK PRIORITY LEVEL
166 In the Function Explorer Tree, select
System View
,
Host-
x,
SERF
(where
-
x is the Host
name) to open the
Prism on SERF of Host
-n view in the EMS View Frame.
177 In the
Clock Priority Level
list, set the Clock Priority Level for the Host. This is in
effect a Master/Slave setting in that the Host in a multi-Host system with the
highest
Clock Priority Level
(CPL) will provide the Master Clock on the fibers. All
other Hosts and Remotes will recover clocks from higher levels. The highest level
is
1
, the lowest level is
14
.
0
and
15
are “no level” settings that results in a zero
pattern being played on the fiber, which effectively shuts it down. The default is
14
.
In a Multi-Host system, each Host must have a unique CPL. If one or more Host is
set to the same CPL, an alarm will be generated.
188 Click
Apply
.
For information on the SeRF alarm indicators, see “Viewing the Host SeRF
Summary” on page 222.