User Manual Part 2

Initial Prism System Setup

Page 146 FlexWave Prism Host, Remote and EMS 5.1 System Reference

6.2 DISCOVER IP ADDRESSES

66 In the Function Explorer Tree, click on

System View

to display a system view.

The

Alarm Summary

view opens in the EMS View Frame. The

Alarm Summary IP

Address

columns provide the IP address for the Host and Remote. You can use this

IP address to log into the Host and Remote unit through a LAN or WAN

connection.

The

Alarm Summary

view will display all Remotes connected to the Host, so up to

eight Remotes can be listed. (The number of Remotes listed changes as Remotes

are added or removed from the FlexWave system.)

77 Note the Host IP address for future use: _________________________

88 Note the Remote IP address(es) for future use:

•• Remote1 _________________________

•• Remote2 _________________________

•• Remote3 _________________________

•• Remote4 _________________________

•• Remote5 _________________________

•• Remote6 _________________________

•• Remote7 _________________________

•• Remote8 _________________________