User Manual Part 2

Initial Prism System Setup
Page 144 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
6.1 ACCESS THE EMS
11 Use an Ethernet CAT 5 cable with RJ-45 connectors to connect a laptop to the Craft
port of the Host, as shown in the following figure.
22 Connect your computer and start a Web browser.
33 In the Web browser URL field, enter the following IP address: 192.168.0.1
If you have configured your Prism system with static IP addresses, enter the assigned
IP address inst
ead of 192.168.0.1.
77073-075
RJ-45
Connector
Detail