User Manual Part 2

FlexWave EMS Overview
FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 137
ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
As shown in Figure 5-2, you access the embedded EMS through the Host, where RF
signals are converted to optical signals for distribution to the local coverage area. The
EMS is thus in a position to monitor both types of signals, and to report status,
alarms, and RF signal levels through automatic, periodic updates and in response to
user requests. User requests can include commands to set RF gain and propagation
delay.
Figure 5-2. The Function of the EMS
HOST
with
Embedded
Element
Management
System
FlexWave
REMOTE
BTSs
Antennas
RFRF
OPTICAL
WDM
(Optional)
User
Requests
Status
Alarms
RF Signal Levels
77073-021