User Manual Part 2

Installing the Remote Unit
Page 132 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
4.4.10 Mount the Remote and Power Up
522 Refer to the detailed instructions for mounting the FlexWave Prism Remote in the
Remote Unit Mounting Kit Installation Instructions (ADCP-77-077) to mount the
Remote in the location selected in Section 4.2, Remote Mounting Plans, on page
96.
533 Power up the Remote by turning its AC power switch to On.
544 Close and tightly secure the Remote door and Solar Shield.
SeRF
Module
AC Power
switch for
Remote
chassis
77073-049