User Manual Part 2

Installing the Remote Unit
Page 130 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
488 Enter the power consumption in the spaces provided below.
499 For the total RF Module power consumption, calculate the power consumption
from Table 4-3 on page 131 for each RF Module present in the Remote (RF Module
A - D), add the Watts, and then enter the total in the Total Power Consumption
field.
500 Divide the total Watts by the input Voltage to determine the current (Amperes)
requirements.
511 Determine the circuit breaker or fuse size based on local codes and practices.
Circuit breaker or fuse size must be 20 Amps or less.
SeRF Module power consumption from Table 4-2 _________Watts
Additional SFPs _____ x 1.25W _________Watts
RF Module A power consumption from Table 4-3 _________Watts
RF Module B power consumption from Table 4-3 _________Watts
RF Module C power consumption from Table 4-3 _________Watts
RF Module D power consumption from Table 4-3 _________Watts
TOTAL POWER CONSUMPTION
_________Watts
Watts
= Amps
Volts