User Manual Part 2

Remote Installation Overview
FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 95
ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
4.1.2 Required Tools and Materials
The following tools are required in order to complete the procedures in this
instruction:
•• Socket Wrench and 3/8-inch Deep Socket
•• Wire cutters
•• Wire stripper
•• Compression pliers for splicing grounding cable
•• Tools for installing exterior AC circuit
•• Tool kit for attaching N-Type connectors to coaxial cable
•• Fiber cleaning kit
The following materials are required in order to complete the installation procedures:
•• #6 AWG (4 mm) copper wire and splice
•• #10 ring terminal for attaching #6 grounding wire to bottom of unit
•• Connector for attaching #6 grounding wire to approved earth ground source
•• Junction box, conduit, fasteners, connectors, and wire to install an exterior AC
circuit.
•• N-Type male connectors
•• RJ-45 connector (if making a permanent external network cable connection)