User Manual Part 2

Installing the Remote Unit

Page 110 FlexWave Prism Host, Remote and EMS 5.1 System Reference

4.4.3 Install the 40W RF Module

11 Hold the RF Module so that the DART card(s) face away from the Remote and the

Mounting Hook is toward the Receiving flange on the Remote chassis.

22 Holding the RF Module at a 45° angle in respect to the rear heatsink, rest the

bottom surface of the module on the RF Module shelf, as shown below:

Always install RF Modules from the bottom up and do not skip a shelf.

Installing a dual-slot RF Module

77072-004