User Manual Part 2

Changing a User Access Level
FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 203
ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
33 Click
Change Access Level
to open the
Change Access Level
window.
44 Verify that the correct user is listed in the
User ID
field.
55 Select a new access level. The system has three access levels, but supports only
one admin (Network Administrator) account. The revised user
Access Level
can
therefore only be one of the following:
•
networkManager
—has read and write access to all system functions except user
account management.
•
networkUser
—has read only permissions into the system.
66 Click
Apply
.