User Manual Part 2

Install the Remote
FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 103
ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
122 Secure the two module latches on the left side of the RF Module.
133 Verify that the RF Module Mounting hook is engaged correctly by pulling the
module away from the heat sink. The RF Module should not move. If the RF
Module moves during this check, repeat Step 9 on page 100 through Step 12.
144 Position the cables so that are under the right edge of the RF Module, pointing up.
77073-041