User Manual Part 2

Working with Prism System Network Interfaces
FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 193
ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
55 Use an Ethernet CAT 5 cable with RJ-45 connectors to connect a laptop to the Craft
port.
66 Connect your computer and start a Web browser.
77 Verify that the laptop is receiving an IP address in the 192.168.0.0/24 subnet (that
is, 192.168.0.100 or 192.168.0.99 and so forth).
88 In the URL field for the Web browser, enter the IP address of the Craft port
(defaults to 192.168.0.1).
99 When the
Connect to
dialog opens enter viewer in the
User name
box and in the
Password
box.
100 Click
OK
. The
Welcome to ADC FlexWave Prism Embedded Web Server
page opens.
The user name (viewer) and password (viewer) used to access the EMS through the
Remote Craft port can
not be changed.