User Manual Part 1

FlexWave Prism Host, Remote and EMS 5.1 System Reference Page ix
ADCP-77-073 • Issue 2 • 11/2009 ©2009 ADC Telecommunications, Inc.
PREFACE
FlexWave Prism User Documentation........................................................................... x
Following the EMS Procedures in This Document ...........................................................xi
General Safety Precautions .......................................................................................xii
Standards Certification ............................................................................................ xiii
This document provides basic description, application, and configuration
information about the ADC
®
FlexWave™ Prism system. The information in this
document guides you through:
•• designing a Prism system
•• installing Prism Host and Remote Units
•• configuring the Prism system through the FlexWave Web-Based Element
Management System (EMS) Version 5.1. The EMS is an embedded software
application that runs on the Host and that may be accessed via an internet
connection using a Web browser. This document shows how to connect to the EMS
software using a SNMP manager to interact with the SNMP database that is used
to store system parameters. SNMP (Simple Network Management Protocol) is an
international standard for remote management of online devices.
Throughout this publication, all items referenced as “accessory items” are not
furnished with the basic product and must be purchased separately.
Content Page