User Manual Part 1

DART Cards
FlexWave Prism Host, Remote and EMS 5.1 System Reference Page 15
ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
1.4.2 DARTs and Remote Units
The Remote DARTs are encased in its RF Module. Each RF Module will have up to two
Classic DARTs or Single SuperDARTs, or one Dual SuperDART, and there can be up to:
•• one RF Module in a Single-Band chassis
•• two RF Modules in a Dual-Band chassis
•• three RF Modules in a Tri-Band chassis
•• four RF Modules in a Quad-Band chassis.
The Remote DART Interface cards (RDI) and the Remote SeRF interface board (RSI)
provide Remote SeRF and DART connectivity for the Prism high speed digital
connections. The configuration of the DART cards provide the RF spectrum.
Prism Remote RF Modules are not field serviceable. To replace a DART within a Prism
Remote, you must
replace the RF Module.