User Manual Part 1

FlexWave Prism Host, Remote and EMS 5.1 System Reference Page xi
ADCP-77-073 • Issue 2 • 11/2009 © 2009 ADC Telecommunications, Inc.
Fonts
You will find the following font conventions in use throughout the document:
•
This font
indicates a reference to a EMS dialog box, menu item, configuration
option, or other parameter.
• This font indicates text you type at a prompt.
• T
HIS FONT indicates keys that you need to press on your keyboard.
•• When a procedure requires clicking on a sequence of items, commas separate the
items. For example, “click
User Account Management
,
User Account
” indicates that in
the Function Explorer Tree, you select the
User Account Management
node, and then
select the
User Account
node.
Illustrations
Some illustrations have numeric callouts. These callouts indicate the related step
numbers in the accompanying text.
FOLLOWING THE EMS PROCEDURES IN THIS DOCUMENT
This document includes descriptions of how to use the FlexWave EMS to configure
and manage FlexWave Prism devices.
Starting a Procedure
All procedures in this document assume that you have already logged in to FlexWave
EMS as described in “Access the EMS” on page 144.
Finishing or Canceling a Procedure
In general, the procedures in this document end each procedure with having you click
OK
or
Apply
to accept changes or input. However, you can also click
Close
without
clicking
Apply
to abandon any changes made, or click
Refresh
to update the data being
shown.
The following table describes the most common EMS dialog buttons.
Button Function
OK
Applies your configuration changes and closes the dialog.
Apply
Applies your configuration changes without closing the dialog.
Close
Discards any changes you have made in the dialog—unless you have
previously clicked
Apply
—and closes the dialog. In a performance or
status dialog, closes the dialog.
Refresh
Updates status information to reflect current conditions.