User Manual Part 1

Installing the Host Unit
Page 88 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
The Host WDM module is mounted within a powder-paint coated sheet metal
enclosure. A straight LC-type optical connector port is provided for connecting the
forward/reverse path optical fiber to the WDM module. A pair of fiber patch cord
leads with LC-type connectors are provided for connecting the WDM module to the
forward and reverse path optical ports on the Host SeRF card. The WDM Host module
mounting shelf and Host module are shown in Figure 3-5.
Figure 3-5. WDM Host Module and Host Module Mounting Shelf
Figure 3-6 provides WDM port information.
Figure 3-6. WDM Ports
The WDM Test port (Port 3 shown in Figure 3-6) is a monitor or trap port. When taking
a reading at this port,
the signal power is 23 dB less than the input power going into
Port 1. The wavelength of light measur
ed is 1550 nm.
22390-A
Port 1: 1550nm IN (FWD)
Port 2: 1310nm OUT (REV)
Ports
1
2
3
4
77073-029
Port 3: -23dB 1550nm Test port
Port 4: 1310/1550nm