User's Manual

Initial Prism System Setup

Page 152 FlexWave Prism Host, Remote and EMS 5.1 System Reference

6.6 CONFIGURE THE HOST DARTS

Configuring a Host DART provides information required for the DART to operate in

RF transmission. Each DART is configured in hardware to operate within a specific RF

band such as PCS or Cellular; the passband is a software-defined sub-band of the

hardware-defined band. Forward and reverse path gain, diversity status, and

operating mode may also be set when a Host DART is configured. The same settings

are applied to the Remote DART when linked to the Host DART. The Host has eight

slots for DART cards.

233 In the Function Explorer Tree, select

System View

Host-

SERF

DARTS

(where

x is

the Host name) to open the

DART’s Alarm Summary

view in the EMS View Frame.

The

DART’s Alarm Summary

view displays all the Host DARTS that are present,

starting from slot 1 at the top of the list and working sequentially down to last

DART, which can be slots 1-8.

244 In the

Information

column, click on the

Band-Config

link for the DART to be

configured.

If you are setting up a multi- host system, go to “(Optional) Configuring Multi-Host

Systems for Manual Mode” on page 168.