User's Manual

Installing the Remote Unit

Page 98 FlexWave Prism Host, Remote and EMS 5.1 System Reference

4.3.2 Install the Remote RF Module(s)

The RF Module cables that are pre installed in the Remote connect to the

corresponding connectors on the RF Module. The RF Module cables correlate to the

antenna connectors on the bottom of the Remote chassis. The cables and connectors

have corresponding labels as shown in Table 4-3. The RF cable and connector labels

also correspond to the RF Module slots in the Remote chassis, where MOD A is the

bottom shelf and MOD D is the top shelf.

Table 4-3. RF Antenna Labels

Remote RF

Module

Shelf

RF Module Cable,

RF Module

Connector, and

Remote Antenna

Connector Labels

Function

MOD A Mod A TX0/RX0 Transmit RF power and primary receive to/from the antenna

for RF Module A

Mod A RX1 Diversity receive for RF power from the antenna for RF

Module A

MOD B Mod B TX0/RX0 Transmit RF power and primary receive to/from the antenna

for RF Module B

Mod B RX1 Diversity receive for RF power from the antenna for RF

Module B

MOD C Mod C TX0/RX0 Transmit RF power and primary receive to/from the antenna

for RF Module C

Mod C RX1 Diversity receive for RF power from the antenna for RF

Module C

MOD D Mod D TX0/RX0 Transmit RF power and primary receive to/from the antenna

for RF Module D

Mod D RX1 Diversity receive for RF power from the antenna for RF

Module D