User's Manual

Initial Prism System Setup

Page 148 FlexWave Prism Host, Remote and EMS 5.1 System Reference

111 Click

Apply

. The new

Host Name

displays in the Function Explorer Tree and the

Host

Summary

view as part of the view title and in the

Host Name

box.

122 In the

10 MHz Reference Clock

list, select

internal

(default) or

external

. The SeRF

board on each Host and Remote contains the master clock for that unit. At the

Remote, the reference is a clock derived from the Host clock. The

10 MHz Reference

Clock external

setting allows you to frequency lock the master clock to an external

10 MHz reference.

You may need to click in the Function Explorer Tree frame and then click Refresh before

the new name

appears.

When using the 10 MHz external reference clock, the signal must be connected to the

Host before enabl

ing the clock in the software. If an external 10MHz reference clock is

selected for operation, but is

not present or outside of the frequency range of 10MHz

+ /- 5ppm, communication between the Host and

Remote over the optical fiber will fail.