User's Manual

SNMP Interface
Page 306 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
fwuRmtFanUnderSpeedFaultMask
Show status of masking of
Remote Fan Under Speed
Fault; masking is disabled by
default; if enabled, the trap
will not be raised
MASKType SET
fwuRmtOverTempFaultThreshold
Threshold value for remote
over temperature Fault. This
is not user settable.
MASKType SET
fwuRmtUnderTempFaultThreshold
Threshold value for remote
under temperature Fault. This
is not user settable.
MASKType SET
fwuHMmonIndex
Index of mate monitor table. Integer32 GET
fwuHMmonRmtLocation
Location of Remote
connected to Host
DisplayString GET
fwuHMmonRmtIPAddress
IP addresses of Remote IpAddress GET
fwuHMmonRmtID
ID of connected Remote REMOTENBRT
ype
GET
fwuHMmonHstSideSFPID
Slot ID of the SFP at Host end. Integer32 GET
fwuHMmonRmtSideSFPID
Slot ID of the SFP used at
Remote end
Integer32 GET
fwuRMmonIndex
Index of mate monitor table Integer32 GET
fwuRMmonHstIPAddress
IP addresses of Host
connected to the Remote
IpAddress GET
fwuRMmonHstID
ID of Host connected to the
Remote
HOSTNBRType GET
fwuRMmonRmtID
ID of companion remote unit. REMOTENBRT
ype
GET
fwuRMmonHstSideSFPID
Slot ID of the SFP at Host end Integer32 GET
fwuRMmonRmtSideSFPID
Slot ID of the SFP used at
Remote end.
Integer32 GET
fwuGeoHeartbeatTimer
Specifies Heartbeat can be
sent at the timer specified
here, from 1 to 30
INTEGER SET
fwuGeoIndex
Geo objects Table Index. Unsigned32 SET
fwuGeoLatitude
Identifies the Latitude of
Remote
DisplayString SET
fwuGeoLongitude
Identifies the Longitude of
Remote
DisplayString SET
fwuGeoRmtName
Identifies the Latitude of
Remote
DisplayString GET
Table 12-2. FlexWave-URH Agent MIB GET/SET Objects (Cont.)
Object Name Description SNMP Syntax Get
or
SET