User's Manual

Managing Host Units
Page 220 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
9.4 DECOMMISSIONING A DART IN A HOST
The
Decommission
button is available only when a DART has already been physically
removed. You use the
Decommission
button to remove DART configuration settings
and to delete DART alarms from EMS alarm summaries. Entries in the Alarm History
Log, however, are preserved.
11 In the Function Explorer Tree, select
System View
,
Host-
x,
SERF
,
DARTS
(where
-
x is
the Host name) to open the
DART’s Alarm Summary
view in the EMS View Frame.
Only a user logged in under the admin or a Network Manager account can change Prism
system settings t
hrough the EMS.
This procedure is for decommissioning a DART in a Host. For information on
decommissioning a DART in
a Remote, see “Decommissioning an RF Module in a Remote”
on page 232.
Decommission a DART only if it has been permanently removed from the Remote and
will not be replaced
with another DART. When a DART is taken out of service, this
procedure removes information about the
DART (such as associated alarms, links, and
inventory) from the EMS database.
You must delete any RF links before you can decommission a Host DART. The FlexWave
system prevents a
decommission if RF links are in place.