User's Manual

Managing Remote Units
Page 238 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
10.4.2 Reset the LPA
33 In the Function Explorer Tree, select
System View
,
Remotes
,
Remote#-
x,
SERF
,
RF
Groups
(where
Remote#
indicates the Remote number that corresponds to a Host
SFP port number and
n is the Remote name).
44 In the rectangle for the RF group selected, click on the
config
link for the band
whose LPA needs to be reset.
55 In the
Configuration Details
window, click the
LPA Reset
button.
Once an LPA Reset is started, Loss of Service occurs. It take approximately 10 to 20
seconds before t
he LPA signal recovers. The GUI RF power reading will take longer
depending on the number of Remotes
equipped—for a fully loaded Prism system with 8
Remotes the power reading could take several minutes
to update.